Gain Notes for Revolution 795
	
JEM-X1: A quite normal revolution with fine gain fitting. All the data from 
this revolution should be useable. The Xe analysis confirms that the energy
determination for this revolution is okay, within about 3-4% of the ideal. 
However, as for all revolutions, the first few science windows should be
avoided in any analysis requiring very good gain determination. Results shown
here use OSA8.0 software and so include temperature variation in the
smoothed gain model. Most of the strong deviation from ideal calibration
arises from the Xe line itself being pushed up towards the high energy cutoff
of the instrument, and doesn't actually represent a problem for energy
calibration below 29keV.

Calibration source number 4 (purple/orange) is no longer
used for calibration purposes since an anode strip directly under the source
has broken and no useable signal comes from this area of the detector any
longer.

JEM-X2: No scientific data or gain history data for this unit.

CAO 27/5/2009