Gain Notes for Revolution 160
	
JEM-X2: A quite normal revolution with fine gain fitting. All the data from 
this revolution should be useable.
First 2 points on each curve are the partial switch on of the instrument with
HV set 3 steps below its nominal value.
The HV switch off right at the end of the revolution is well fitted and
should not affect the science data. The gain decay seen after the re-activation
is due to charge redistribution on the microstrip plate. Switch off was 
caused by automatic shutdown initiated by the radiation monitor due to high
particle background.

From End-of-revolution report:
c) 2004-02-06T13:59 MOC said: Since 12:44 to 13:59 JemX2 in safe mode due  
    to IREM trigger. Will stay in safe mode until new revolution.
    


CAO 10/01/2006