Gain Notes for Revolution 134
	
JEM-X2: A quite normal revolution with fine gain fitting. All the data from 
this revolution should be useable.
First few points on each curve belong to the partial switch-on for which HV is
set 3 steps below its nominal value.
The break towards the end of the revolution is well-fitted but marks a period
during which tests were carried out on the calibration source collection areas
so that calibration events appeared in the science data.
This period is now officially designated a BTI, since response is not measured
at all during this period through the official routes. The BTI is:
IJD= 1419.53 to 1419.74.

CAO 10/11/2006