Gain Notes for Revolution 33
	
JEM-X1: No data or gain history for this unit

JEM-X2: A quite normal and quiet revolution with fine gain smoothing, all the
	data from this revolution should be useable. This is equally true for
	the arc/rev_2 001 processing and the 002 processing.
	Many small glitches are	clearly visible thanks to the generally low 
	noise level. especially on sources 2 (yellow/pink) and 3 (blue/green)
	which are always the least noisy sources. Source 4 is
	(purple/orange) already demonstrating relatively high noise. Later the
	position of this source becomes so unstable that it becomes unuseable.
	The first 5-7 points on each curve belong to the partial switch on
	period at the beginning of the revolution where the unit is switched on
	initially at three steps below the nominal high voltage (HV) setting.
	This was done to protect the unit from the very high gain seen after
	activation at the begining of the mission.
	
This revolution reprocessed with latest software March 2006.

CAO 14/03/2006